Protosoft 32
• Flow metered delay automatic control valve
• 32,000 grains max hardness removal
• Efficient salt usage based on water usage
• Ceramic valve for longevity
• ResinTech Commercial Grade resin with WQA Gold Seal Certified
• All components used are NSF certified
Max Hardness Removed :32,000 grains
Water Capacity: 18GPM
Min. pH: 7pH
Working Temperature: 5-50 °C
Operating Voltage: 120VAC
Inlet/Outlet Connection: ¾” or 1”
Resin Spec: Sodium form 8% crosslinked gel strong acid cation resin
Package Contains
- Protosoft™32 ResinTech filled resin FPR Tank with Automatic Control
- Brine Tank
- Brine Tank Valve
- Water Bypass Valve with flow meter
- Water Connector (2)
Premium Resin By:
Cost
of Work
Salt usage us dependent on the water usage. The more water used, the quicker the salt is used. We suggest checking salt level once a month
Regeneration is dependent on the usage of water. When we program the softener, we aim to regenerate once a week.
Fast rinse cycle should wash most salt off the resin. If water do taste salty after regeneration, we can program to extend the fast rinse cycle to clear more salt out of the water softener prior to use.
Call expert
(905)235-7811
Write email
sales@3dproto.ca
Visit office
5-110 Riviera Dr. Markham, ON L3R 5M1